As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
How do you feel when you want to relax then someone starts the noisy washing machine? It’s frustrating, and you can’t ask them to turn it off. But now you don’t have to worry about these noises anymore.
We love living in a quiet house. This is why our life is dedicated to helping millions of other people who are struggling with such noises.
In this article, we will share with you simple techniques that will help reduce most of the noises you will hear from your washing machine.
Let’s begin.
1. Inspect and Fix the Source of the Noise
When it comes to noisy appliances, rule number one of noise reduction is to inspect the source of the noise.
A washing machine is not an exception in this case. Some noises you might be hearing could be a signal of a problem that needs attention with your washing machine. So, whenever your washer makes more noises, inspect and identify the source of the sound you hear.
If the noise is a result of a faulty part or function, fix it. Don’t rush to soundproof your machine. If it’s a faulty system, the soundproofing technique might work well, but your machine would get broken down.
Here are some of the areas you need to inspect every time your washing machine makes a lot of noise.
Washing machines have drain pumps. Their main purpose is to pump water before, during, and after the spin cycle. If you hear more noises coming from your machine during and after the spin cycle, chances are the drain pump might be defective or has a restriction.
Inspect the pump and check any signs of wear or damage. If you notice any problem with the pump motor, replace it.
Drive Belt
The drive belt connects the motor and the wash basket for spinning. It’s a V-shaped belt made of rubber. Some of the belt drives have a fabric covering on them. The fabric material reduces the amount of friction when the motor starts up.
Inspect the belt for any signs of wear, damage, fraying or burning. If you find any of the above problems, be sure your belt will make noises. So, replace the drive belt and say goodbye to the unwanted noises.
Direct Drive Motor Coupling
If you own a top loader, it has a direct drive motor coupling. It transfers power to the transmission to power the motor that rotates the drive belt.
The drive motor coupling has two plastic drive forks with one attached to the shaft rotates. When you use your washing machine over time, the rubber and plastic forks wear out. As a result, the forks slip and cause excess vibrating noises.
The vibration noises might seize the whole transmission, which fails the coupling completely. In the end, you will only hear much of vibrating noises.
Inspect Shock Absorbers
Most washing machines have shock absorbers to reduce noises from the tub movement during the spin cycle. The struts or shock absorbers are at the base frame.
When the shock absorbers become damaged or weaken, you will regularly hear a loud banging sound during the spin cycle. And if this problem is not fixed immediately, there are high chances that other components in your washing machine would be damaged.
Tub Dampening Strap
If a washing machine is not manufactured with a dampening strap, it turns out to be noisy. This is why it’s important to buy quieter washing machines. With them, you can be assured you will only experience less noise.
However, the tub dampening strap wears with time.
Check all the four straps attached to the top of your tub for a top loader model. Check whether they are damaged or stretched. When the straps are loose, they leave your washing machine, making a loud banging sound during the spin.
Excessive loads are to blame for this common problem.
2. Use Anti-vibration Pads
Washing machines vibrate when they are operating. This is why there are anti-vibration pads designed specifically for washing machines.
The role of the pads is to absorb all vibrations coming from the washing machine. The vibration sounds travel easily on solid structures or platforms. However, the soundproofing pads are effective in dealing with the noise before it travels and causes disturbances.
If you have inspected your washing machine and no major problem was identified, its advisable to get the anti-vibration pads from Amazon. Buy them and install them under your washer.
Apart from absorbing vibration noises, the pads will also give your washer a firm standing base. Here are the top anti-vibration pads to buy and install under your washer. Buy them today on Amazon and eliminate unwanted noises from your washer.
Washer Dryer Shock Absorbing Pads
[asa2 tpl=”Flat_box_horizontal”]B01LYMZYOO[/asa2]- Pack of 4 Universal Anti-Walk Pads
- Excellent Shock Absorber
- Non-Skid Design
- sturdy and durable
- Made of recycled tire rubber
- Effective Anti-Vibration platform
3. Use Soundproofing Mats
Soundproofing mats absorb and deaden vibration noises. This is the reason why they are commonly used in soundproofing automotive.
Washing machines vibrate during the spin cycle. So, if you want to deal with the vibrations, soundproofing mats will get this done.
Start by placing them beneath the washer. They will absorb the vibrations from your washing machine before they travel to cause disturbances in other rooms. You can also install the mats on the sides of the washer. Only leave the areas where you would be needed to open the washer.
Most of the soundproofing mats are self-adhesive. This makes the installation process easy. Even without experience, you can buy them on Amazon, cut into desired sizes and install them over your washer.
The good news is that the washers are available on Amazon. Go ahead and buy them today and eliminate the noise from your laundry room. Here are top soundproofing mats you should consider buying today.
[asa2 tpl=”Flat_box_horizontal”]B07P5KQ9LV[/asa2]- Fiberglass material,
- High noise reduction
- High-temperature resistance
- Size: 170 mil 36 sqft
- Waterproof
- 1/6” Thick Sound Deadener
Soundproofing mats are water and heatproof. If you are looking for a technique that would easily quiet your washer, buy either of the two mats on Amazon and soundproof your washer.
4. Cover Your Washer with a Soundproofing Blanket
Soundproofing blankets are perfect for absorbing excess sound from dryers and washers. For that reason, buy a soundproofing blanket and lay it beneath your washer.
When covering your appliance, you don’t need to cover it completely. To control the noise from the appliances, apply the following strategies.
– Lay a blanket on the floor.
– Place the appliance at the center of the blanket.
– Tape the free blanket to the sides of the machine.
Leave another blanket untaped. You can be using it to cover the washer every time you start it. It will help in reducing noise.
A blanket or a heavy rug function well. You can use either. However, ensure you clean and dry the blanket regularly. This will prevent bad odors from coming from your laundry room.
Here are the best blankets that will get the job done for you. Buy one of these blankets and enjoy soundproofing your washing machine — no more noises.
Sure-Max 12 Moving & Packing Blankets
[asa2 tpl=”Flat_box_horizontal”]B01GK6JTFE[/asa2]- Deluxe Pro
- Double-sided construction
- 80″ x 72″ (40 lb/dz Weight)
- Professional Quilted Shipping Furniture Pads Royal Blue
- Effective sound absorption.
- Measures 95″ x 54.
- Great for recording studios, drum rooms, rehearsal spaces, vocal booths, and more
- Installation hardware included
5. Avoid Overloading Your Washing Machine
Every washing machine comes with instructions. They clearly show the washing machine capacity. It’s advisable always to load your washing machine to the required capacity. If you exceed the weight of the load, you definitely stress out your washer.
As your washing machine strains to spin the load, it makes more noise than you would desire to hear.
Underloading your washing machine again is a bad idea. It will make more noise and waste energy. Underload leaves some space inside the spin basket. If your clothes have hard parts like buttons or zippers, they will jingle and rustle along the metal barrel.
As a result, you will hear more noise coming from the washer. So, all you need to do is load your washer full but not bursting.
6. Soundproof Your Laundry Room
After doing all possible soundproofing techniques, you can go ahead and soundproof your laundry areas. This will ensure that when the machine spin, it doesn’t affect people talking or watching TV in other rooms.
You can apply the following simple ways to so soundproof your laundry rooms.
- Get a solid door over your laundry room.
- Hang soundproofing curtains and blankets over the windows and doors of the laundry room
- Cover all the door sweeps tightly
- Thicken the laundry room walls and ceiling
Parting Shot
With a quiet washer, you don’t need to worry about laundry. Even if you remember you have dirty clothes, you need them the following day, and it’s the middle of the night, you can wake up and load them. You don’t need to worry about waking people in the house.
To achieve all quietness, you need to combine more than one technique discussed in this article. Be ready to enjoy the tranquility of your home even when the washer is spinning.
